UltiMaker

Ultimaker ABS Used by an array of industries worldwide, ABS (acrylonitrile butadiene styrene) is known for its exceptional mechanical properties. Specifically formulated to minimize warping and...

Ultimaker ABS Used by an array of industries worldwide, ABS (acrylonitrile butadiene styrene) is known for its exceptional mechanical properties. Specifically formulated to minimize warping and ensure consistent interlayer adhesion, our ABS allows the creation of functional prototypes and complex end-use parts with ease. TECHNICAL SPECIFICATIONS: Printing Temperature: 245 - 260 C Print Speed: 40 - 100 mm/s Heated bed: 80 C ...

Ultimaker CPE CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts....

Ultimaker CPE CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. TECHNICAL SPECIFICATIONS: Printing Temperature: 240 - 260 C Print Speed: 40 - 100 mm/s Heated bed: 60 C ...

Ultimaker CPE+ CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts....

Ultimaker CPE+ CPE (co-polyester) materials are chemical resistant, tough and demonstrate good dimensional stability. It is a preferred choice for both functional prototypes and mechanical parts. While both CPE and CPE+ provide similar performance characteristics, CPE+ provides the added benefit of higher temperature resistance and increased impact strength. TECHNICAL SPECIFICATIONS: Printing Temperature: 250 - 260 C Heated bed: 110 C ...

Ultimaker PLA Ultimaker PP (polypropylene) is durable. It has high toughness, exceptional fatigue resistance, and low friction. It also has good chemical, temperature, and electrical resistance. PP...

Ultimaker PLA Ultimaker PP (polypropylene) is durable. It has high toughness, exceptional fatigue resistance, and low friction. It also has good chemical, temperature, and electrical resistance. PP is one of the most widely used plastics on the planet. From electrical components to living hinges, PP is the go-to material for prototyping and end-use products. TECHNICAL SPECIFICATIONS: Printing Temperature: 195 - 220 C* Print Speed: 40 - 100 mm/s Heated bed: 60 C ...

Polymaker PolyWood PolyWood™ is a wood mimic filament without actual wood powder, which removes all risks of nozzle clogs. PolyWood™ is made entirely with PLA using a special foaming technology. It...

Polymaker PolyWood PolyWood™ is a wood mimic filament without actual wood powder, which removes all risks of nozzle clogs. PolyWood™ is made entirely with PLA using a special foaming technology. It exhibits the same density and appearance as wood. TECHNICAL SPECIFICATIONS: Printing Temperature: 190˚C – 210˚C Print Speed: 35mm/s – 50mm/s Heated bed: 25˚C – 60˚C Bed Surface: Glass with glue, blue tape Cooling Fan: ON TECHNICAL INFORMATION: TDS:DOWNLOAD SDS:DOWNLOAD ...

Print Core AA is a swappable Ultimaker 3 print core used for printing build materials including Nylon, PLA, CPE, CPE+, ABC, PP, and TPU 95A.

Print Core AA is a swappable Ultimaker 3 print core used for printing build materials including Nylon, PLA, CPE, CPE+, ABC, PP, and TPU 95A.

Print Core BB is a swappable print core for Ultimaker 3 and Ultimaker 3 Extended, with a custom nozzle geometry optimized for PVA material.

Print Core BB is a swappable print core for Ultimaker 3 and Ultimaker 3 Extended, with a custom nozzle geometry optimized for PVA material.

Using the Ultimaker 3 cleaning filament is the most effective way to unclog and keep print cores in optimal condition. When to use the Ultimaker 3 cleaning filamentThe Ultimaker 3 cleaning filament...

Using the Ultimaker 3 cleaning filament is the most effective way to unclog and keep print cores in optimal condition. When to use the Ultimaker 3 cleaning filamentThe Ultimaker 3 cleaning filament is used for both print core maintenance and unclogging procedures. We recommend performing regular maintenance once every three months. Unclog the print core if there is no material extruding from the nozzle for at least ten minutes. ...

Only fits the Ultimaker S5.

Only fits the Ultimaker S5.