Castable Resin
Castable Resin burns out cleanly with no ash or residue, capturing you highest-resolution prints through investment casting. Requires UV post-cure. Supports print resolutions: 100, 50, and 25 microns.
Print in fine detail for investment casting.
Castable Resin burns out cleanly without ash or residue and captures crisp, precise detail and smooth surfaces. Jewelers and designers can go straight from a 3D design to a model for direct investment.
Castable Resin Burns out cleanly without ash or residue and captures crisp, precise detail and smooth surfaces. Jewelers and designers can go straight from a 3D design to a model for directs investment.
Accurate Prong Placement
Tiny details like prongs line up so you can set stones with confidence.
Smooth Surface Finish
Accurate layer placement means less metal wasted in finishing.
Fine Details
Create challenging filagree and organic shapes with excellent detail.
Fine Detail Print Settings Optimized for Jewelry
Prong Accuracy
This map shows a scan of a printed ring overlaid with the original 3D model. the color mapping indicates differences, with the green areas revealing dimensional accuracy within ± 0.1mm. This ring, printed at 0.05 mm (50 micron) layers with Fine Detail print settings, also demonstrates prong accuracy, with both large and smaller prongs printing with a very small dimensional deviation of just ± 0.03mm.
Burnout Schedule
Castable Resin has been tested to leave minimum ash behind after burnout, leaving behind a clean void in the mold. Work with our recommended casting houses or use our verified burnout process to go from 3D print to metal with little to no testing.
NOTE:
To achieve desired durability, prints made with Castable Resin should be post-cured approximately 120 minutes at a 45°C temperature under a 405 nm wavelength light source.